Trow and Holden hand-held masonry and stone hammers

Consultation Send inquiry

Shipping by courier.

Possibility to order.

Trow and Holden brand hammers

Trow & Holden manufactures the largest range and highest quality of stone working hammers in the world. From traditional steel stone working and impact hammers to more specialist carbide tipped working hammers, all hammers are manufactured to provide superior durability and functionality. The steel specifications, tempering, geometry and balance of the hammers are carefully considered for the intended application. When choosing a hammer, be sure to choose one that meets the requirements of your job and technique.

Carbide-tipped hammers

Carbide-tipped bush hammer

The carbide heads of this bush hammer provide increased wear resistance when working on high spots, texturing or lightly shaping stone. CARE SHOULD BE TAKEN DURING USE TO ENSURE THAT THE CARBIDE HEADS ARE HIT FLAT ON THE STONE AND THE HAMMER SHOULD NOT BE SWINGED AGGRESSIVELY. Hammer weight approx. 680g, square body with a side of 25mm, heads with 16 and 25 teeth. 32cm wooden handle. Designation HBH1SQCT. Price 245.42 EURO, 480 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Carbide-tipped bush hammer - real photo of the tools. CARE SHOULD BE TAKEN DURING USE TO ENSURE THAT THE CARBIDE HEADS HIT FLAT ON THE STONE AND THE HAMMER SHOULD NOT BE SWINGED AGGRESSIVELY. Hammer weight approx. 680 g, square body with a side of 25 mm, heads with 16 and 25 teeth. 32 cm wooden handle. Designation HBH1SQCT. Price 245.42 EURO, 480 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Carbide tipped point hammer

The carbide point hammer is an effective way to get a rough surface or remove high spots. The hammer can be struck directly into the stone with the blade, used as a striking hammer with the reverse steel side, or held on the stone and struck with another hammer of comparable weight. Deliver more powerful blows by keeping your hands away from the stone chips and protecting yourself from errant blows. Weight 900 or 1800 g. Wooden handle 41 cm long or fiberglass handle 36 cm long. Powerful carbide tip. Designation HHP2CT and HHP4CT. Price per 900g point hammer with wooden handle 158.50 EURO, 310 BGN. Price per 1800g point hammer with wooden handle 189.18 EURO, 370 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Point hammers with carbide blade HHP4CT weighing 1800 g and HHP2CT weighing 900 g - real photo of the tools with a wooden handle 41 cm long. Price per 1800g point hammer with wooden handle 189.18 EURO, 370 BGN. Price per 900g point hammer with wooden handle 158.50 EURO, 310 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Point hammer HHP4CT weighing 1800 g, with carbide blade, on the back of a granite cover from Nero Zimbabwe, from which I will make a monument.

First points on the granite with this hammer.

Working with the point hammer. Zimbabwe is soft for it. The carbide normally gets rounded from the many blows. The handle is sturdy.

More videos

Fiberglass handle 36 cm long for the point hammer, which can be ordered instead of the wooden one. Price of the handle 56.24 EURO, 110 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Hammer for edging soft stones and bricks

By installing Trow & Holden's patented carbide tips on standard 680 gram VAUGHN brick hammers, this hammer is a significant improvement over standard steel brick hammers. Available in three head configurations, they retain their cutting edge longer than steel hammers. They are the perfect tool for repetitive light edging of soft or thinner types of stone. The hammer is available in three head configurations: carbide bushing, carbide flat head or hardened steel flat head. All hammer head configurations include a carbide blade - a pick on the other side. A 30 cm wooden handle is included. FOR STONE HITTING ONLY, AVOID AGGRESSIVE SWINGING AND FALSE STRIKE OF STONE WITH THE ANGLES OF THE HAMMER. NEVER USE TO HIT OTHER TOOLS OR HAMMERS

Hammer for edging soft stones and bricks with a bushing head, with 16 teeth. Designation HRP24BH. Price 230.08 EURO, 450 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Hammer for edging soft stones and bricks with a bushing head, with 16 teeth - real photo of the tools. Designation HRP24BH. Price 230.08 EURO, 450 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Hammer for edging soft stones and bricks with flat carbide head. Designation HRP24BTH. Price 204.52 EURO, 400 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Hammer for edging soft stones and bricks with flat steel head. Designation HRP24B. Price 168.73 EURO, 330 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Steel bush hammers

Steel bush hammers with hardened teeth for light shaping or texturing of soft stone. Weight 450g, 1600g, 2500g, 3400g. With 30cm wooden handle or 33cm fiberglass for the small size, other handles are 41cm long. Designation HBH SQ. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle with a length of 33 cm for the 450 g HBH1SQ bushhammer, which can be ordered instead of the wooden one. Price per handle 56.24 EURO, 110 BGN. Fiberglass handle with a length of 41 cm for the bushhammers 1600 g HBH112SQ, 2500 g HBH134SQ, 3400 g HBH2SQ, which can be ordered instead of the wooden one. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Carbide hammer for refreshing millstone

Traditionally used for reworking millstones, the 900g hammer can also be used for light texturing or light trimming of soft or thin types of stone. It has two 25mm carbide blades, with a wooden or fibreglass handle and a length of 41cm. Designation HMP2CT. Price with wooden handle 230.08 EURO, 450 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle, 41 cm long. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Geological hammer

With a hardened steel tip, ideal for breaking rock, and a hammer face that can be used to strike hand tools or to strike another hammer, it is used when it comes to both fossil hunting and more general rock chasing work. This is especially useful when working with stone that does not splinter easily. Hickory and fiberglass handles are available, both of which offer significantly better shock absorption than forged handles. Weight 500, 600, 800 g. Designation HGP. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle with a length of 33 cm for the 500 g HGP18 geological hammer, which can be ordered instead of the wooden one. Price per handle 56.24 EURO, 110 BGN. Fiberglass handle with a length of 41 cm for the geological hammers 600 g HGP22, 800 g HGP28, which can be ordered instead of the wooden one. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Paleo fossil hammer

Designed specifically for working with fossils, the fossil hammer features a hardened steel splitting blade and a face that strikes the tool. This multi-purpose tool is ideal for splitting shale and limestone, striking hand tools, and can be struck with another hammer. Hickory and fiberglass handles are available, both of which offer significantly better shock absorption than forged handles. Weight 500, 600, 800 g. Designation HPS. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle with a length of 33 cm for the 500 g HPS18 paleo hammer, which can be ordered instead of the wooden one. Price per handle 56.24 EURO, 110 BGN. Fiberglass handle with a length of 41 cm for paleo hammers 600 g HPS22, 800 g HPS28, which can be ordered instead of the wooden one. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Unhardened square impact hammer

This 700 gram Unhardened square impact hammer produces a softer impact that can provide more control when working with softer stone. Excellent for scribing and detailing, a soft stone hammer is also less likely to bruise the stone and will help reduce wear on lighter carving tools. With a 30 cm wooden handle. Designation HCH112SS. Price 66.47 EURO, 130 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiryCarbide set for hand carving and letteringHard stone hand carving kit

Round hammers

Bell-shaped round hammer

A traditional European-style hammer, the bell-shaped hammer offers an alternative to standard hand hammers. This hammer's round head and unique bell shape promote better contact with the chisel, while reducing the risk of mishits and chisel bounce. With a 36 cm wooden or fiberglass handle. Weight 900, 1100, 1300, 1600, 1800 grams. Designation HBB. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Bell-shaped round hammer - real photo of the tools. A traditional European-style hammer, the bell-shaped hammer offers an alternative to standard hand hammers. The round head of this hammer and the unique bell shape encourage better contact with the chisel, while reducing the risks of mishits and the chisel bouncing off. With a 36 cm wooden handle. Weight 900 grams. Designation HBB2. Prices are in the table above. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle 36 cm long, which can be ordered instead of the wooden one. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Round brass hammers

Brass hammers are ideal for engraving or other delicate work. The relative softness of these hammers will absorb some of the impact force of the hammer when it comes into contact with the chisel head, which helps prevent bruising of the stone and reduces wear on the chisel. Weight 450 and 700 grams. Designation HBR. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiryCarbide set for hand carving and lettering

Round steel hammers

The Round Hand Hammer is a traditional style hammer used for striking hand tools during sculpting and carving of details. The round and tapered striking surface facilitates stable contact with hand tools as you move around the figure, in addition to providing a comfortable fit in the hand for more delicate work. These hammers have a medium hardness (28-32Rc) compared to our other impact hammers, making them more suitable for finer, more detail-oriented work with smaller chisels. Weight 450 and 700 grams. Designation HCHR. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiryCarbide set for hand carving and letteringHard stone hand carving kit

Round steel hammers - real photo of the tools. Weight 450 and 700 grams. Designation HCHR. Prices are in the table above. Possibility of ordering. I will send by courier. I need to confirm the request. Order
Send inquiry
Carbide set for hand carving and lettering
Hard stone hand carving kit
Round steel hammers, Guillet brand, prices

Stinger hammer with carbide tips on both sides

Equipped with a carbide tip on one end and a carbide blade on the other, this hammer makes quick work of marking, edging, peeling or splitting. The hammer is available as a 900 gram or 1800 gram hammer with a vertical or horizontal blade to accommodate a variety of styles and applications, with a 41 cm wooden or fiberglass handle.

Hammer stinger with carbide tipped point on one side and vertical blade on the other side. Designation STINGER /V. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Hammer stinger with carbide tipped point on one side and horizontal blade on the other side. Designation STINGER /H. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Hammer stinger with carbide tipped point on one side and horizontal blade on the other side. Designation STINGER2/H. Prices are in the table above. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle 41 cm long, which can be ordered instead of the wooden one. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Carbide double-edged masonry hammer

The hammer features heavy carbide-tipped blades. One side of this 1400 gram hammer is vertical, the other is horizontal, with a 41 cm wooden or fiberglass handle. Designation HDB3CT. Price with wooden handle 250.53 EURO, 490 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle 41 cm long, which can be ordered instead of the wooden one. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Powerful rock hammer buster

The hammer features a heavy carbide blade and a hardened striking surface on the other side. Considered the hammer version of a hand chisel tracer, this hammer can be used in three ways:
With the hardened striking side, you can strike chisels or other relatively heavy dual-purpose hammers.
With the carbide blade, you can strike directly into the stone.
Hold the carbide blade of the hammer against the stone and strike it with another dual-purpose hammer or impact hammer of comparable weight to provide powerful splitting force exactly where you want it, while keeping your hands safe from injury.
Available as a 900 gram or 1800 gram hammer with a vertical or horizontal blade to accommodate different styles and applications, with a 41 cm wooden or fiberglass handle.

Powerful rock hammer buster with vertical carbide blade. Designation HSB CT/V. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Powerful rock hammer buster with horizontal carbide blade. Designation HSB CT/H. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Powerful rock hammer buster with vertical carbide blade HSB2CT/V, general view. Price 204.52 EURO, 400 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Powerful rock hammer buster with vertical carbide blade HSB2CT/V, view from the top.

Powerful rock hammer buster with vertical carbide blade HSB2CT/V, view of the rear steel surface.

Two HSB4CT/V hammers compared to one HSB2CT/V hammer in the middle.

Two hammers HSB4CT/V, general view.

Two hammers HSB4CT/V, close-up view.

Two hammers HSB4CT/V, rear view.

Two hammers HSB4CT/V, another view.

Fiberglass handle 41 cm long, which can be ordered instead of the wooden one. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Powerful universal hammer set for rock processing

The powerful carbide tipped universal hammer allows you to deliver a powerful yet precise blow to make edge work and beveling more efficient. Simply position the blade at a slight angle so that one of the two working edges of the carbide blade makes even contact with the stone, and strike the back with another hammer of comparable weight. This hammer can be used to strike other dual purpose hammers or hand tools.
Available as a 1800 gram hammer with a vertical or horizontal blade to accommodate a variety of styles and applications, with a 41 cm wooden or fiberglass handle.

Powerful universal hammer set for rock processing with vertical carbide blade. Designation HHS4CT/V. Price with wooden handle 224.97 EURO, 440 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Powerful universal hammer set for rock processing with horizontal carbide blade. Designation HHS4CT/H. Price with wooden handle 224.97 EURO, 440 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle 41 cm long, which can be ordered instead of the wooden one. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Powerful, durable rock hammer

With a highly durable carbide blade and carbide on both edges of its concave flaking surface, the hammer is the most wear-resistant. This hammer will split and cut the hardest types of stone and requires less re-sharpening than traditional steel mason hammers. When the carbide working edges start to show wear, the concave flaking surface can be easily refinished with a 150 or 200 mm silicon carbide grinding wheel used to sharpen the blade.
Available as a 1400 gram hammer with vertical or horizontal flaking blades and a 1800 gram hammer with vertical flaking blades, with a 41 cm wooden or fiberglass handle.

Powerful, durable rock hammer with vertical carbide blade for splitting and vertical peeling blades. Designation HMH CTBE. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Powerful, durable rock hammer with vertical carbide blade for splitting and horizontal peeling blades. Designation HMH CTBE/H. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle 41 cm long, which can be ordered instead of the wooden one. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Hammer for trimming the contours of stone

Based on two of the most popular rock shaping hammers, the carbide-tipped pruning hammers offer maximum wear resistance with carbide on each working edge of the hammer. To accommodate different rock pruning techniques, each variety of hammer is available in either a vertical or horizontal orientation. When the edges eventually become dull, flip it over on its handle for 2 more new edges. Works equally well for both right and left-handed users. When the carbide working edges start to show wear, the concave flaking surface can be easily processed with a 150 or 200 mm silicon carbide grinding wheel used to grind the blade.
Available as a 900 gram hammer with vertical or horizontal flaking blades and splitting blade, 1100 and 1600 gram hammers with vertical or horizontal flaking blades, with a 41 cm wooden or fiberglass handle.

Hammer for trimming the contours of stone with vertical carbide blade for splitting and vertical peeling blades, Weight 900 grams. Designation HTH2BCT/V. Price with wooden handle 235.19 EURO, 460 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Hammer for trimming the contours of stone with horizontal carbide blade for splitting and horizontal peeling blades, Weight 900 grams. Designation HTH2BCT/H. Price with wooden handle 235.19 EURO, 460 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Hammer for trimming the contours of stone with vertical peeling blades on both sides, Weight 1100 and 1600 grams. Designation HTH212CT/V and HTH312CT/V. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Hammer for trimming the contours of stone with horizontal peeling blades on both sides, Weight 1100 and 1600 grams. Designation HTH212CT/H and HTH312CT/H. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle 41 cm long, which can be ordered instead of the wooden one. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Carbide hammer for shaping facing stone

The Facing Stone Shaping Hammer is designed specifically for hand-shaping and shaping natural thin stone, which is typically less than 5 cm thick. Its 32 mm wide carbide tipped trimming blade will hold its cutting edge longer than more common brick hammers. The hammer features a beveled striking surface that can be used to strike smaller hand tools. Weight 900 grams, with a 30 cm wooden or 33 cm fiberglass handle. Designation HTSV2CT. Price with wooden handle 204.52 EURO, 400 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle 33 cm long, which can be ordered instead of the wooden one. Price per handle 56.24 EURO, 110 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Steel hammers

Hand steel hammers

One of Trow & Holden's oldest hammer designs, the distinctive shape of the hand hammers optimizes balance and rigidity to deliver powerful blows and better wear. These hand hammers are ideal for striking chisels, wedges or other general hand work purposes.
The 900, 1400 and 1800 gram oval eye hand hammers feature slightly larger striking faces and have sturdier handles to suit more aggressive swinging styles.

Hand hammer with round eye. Weight 450, 600, 700, 800, 900, 1000, 1100, 1250, 1400, 1500, 1600, 1700, 1800 grams, with wooden or fiberglass handle 33 cm. Designation HCH. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Hand steel hammers with an oval eye

Hand hammer with an oval eye. Weight 900, 1400 and 1800 grams, with a 30 cm wooden or 33 cm fiberglass handle. Designation HCH OE. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Hand hammer with an oval eye - real photo of the tools. Weight 900 grams, with a 30 cm wooden handle. Designation HCH2OE. Prices are in the table above. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Hammer from Mallorca

A long-time customer brought this hammer design and asked if we could make it for him. He had used an antique hammer of a similar style while doing stone walls in Mallorca, Spain and was amazed by its versatility. Perfect for making adjustments to the stone with ease, this hammer features a slightly angled head and a curved pointed tip, designed to maximize the swing path and contact with the stone.

Hammer from Mallorca. Weight 900 grams, with wooden or fiberglass handle 41 cm, Weight 1400 grams, with wooden 76 cm or fiberglass handle 81 cm, Weight 1800 grams, with wooden 76 cm or fiberglass handle 81 cm. Designation HLL. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle 33 cm long for hammer HLL2 с Weight 900 g, which can be ordered instead of the wooden one. Price per handle 56.24 EURO, 110 BGN. Fiberglass handle with a length of 81 cm for hammer HLL3 with Weight 1400 g and hammer HLL4 with Weight 1800 g, which can be ordered instead of the wooden one. Price per handle 92.03 EURO, 180 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Mosaic hammers and undercut chisel - anvil

Used for cutting tiles, for detailed mosaic work, mosaic hammers come in three styles: with carbide blades on both sides, steel blades on both sides or a combination. Available in Weight 450 and 1100 grams. If you work with mosaic, a steel chisel is a must. Its pointed end is designed to be driven straight down into a wooden block, leaving the hardened chisel blade pointing upwards to create a fulcrum for precise cutting of glass, ceramic or other mosaic materials. With a 30 cm wooden handle.

Combination mosaic hammer, with carbide and steel tip

Combined hammer for mosaic, one tip is carbide, the other is steel, Weight 450 and 1100 grams. Designation HMO CT/DB. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Steel mosaic hammer

Steel mosaic hammer, Weight 450 and 1100 grams. Designation HMO. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Carbide mosaic hammer

Carbide mosaic hammer, Weight 450 and 1100 grams. Designation HMO CT. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Undercut chisel - mosaic anvil

Undercut chisel - mosaic anvil made of medium-hardened steel, width 44 mm, total length 125 mm. Designation HMO-HARDIE. Price 71.58 EURO, 140 BGN. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Quarry hammer for breaking rocks

Contrary to popular belief, the powerful quarry hammer is made from the highest quality shock absorbing tool steel. The hammer can be used in two ways, to deliver a powerful splitting blow or the hardened steel blade can be placed on the rock while the back of the hammer is struck by another dual purpose hammer or impact hammer of comparable weight. The impact head can be used to strike another hammer.

Quarry hammer for breaking rocks. Weight 4.5, 5.5 and 6.4 kilograms, with a wooden handle 76 or 81 cm or a fiberglass handle 81 cm. Designation HQB. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle with a length of 81 cm, which can be ordered instead of the wooden one. Price per handle 92.03 EURO, 180 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Slab and flat rock splitter

A slab splitter is a specialized splitting hammer designed to be operated by two people. It is not designed to be swung. One person holds the slab splitter blade in position on the surface of the stone while the second person strikes the back of the slab splitter with another hammer of comparable weight.
For splitting more irregular natural stone use the Quarry hammer for breaking rocks above.

Slab and flat rock splitter. Weight 3.6, 4.5 and 5.5 килограма, с дървена дръжка 76 см или от фиберстъкло дръжка 81 см. Designation HSS. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle with a length of 81 cm, which can be ordered instead of the wooden one. Price per handle 92.03 EURO, 180 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Rock breaking hammer

The design of this traditional-style stonemason's hammer is almost as old as stonemasonry itself and offers an effective method of shaping stone. The blade can be used for splitting stone, while the flat, square back of the hammer is used for trimming and general shaping. The entire hammer is hardened for maximum durability and should only be used for striking stone. The stonemason's hammer should never be used for striking with other steel tools. The hammers with Weight 900, 1400 and 1800 grams are available with carbide-tipped blades for increased wear resistance. Need something even more wear-resistant? See Powerful, durable rock hammer above.
Available in Weight 0.9, 1.4, 1.8 2.7, 3.6, 4.5, 5.4, 6.4, 7.3, and 8.2 kilograms, with wooden handle 41, 76 or 81 cm, fiberglass handle 41 or 81 cm.

Rock breaking hammer made of steel

Rock breaking hammer made of steel. Designation HMH. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle 41 cm long за чукове с Weight до 1.8 kg, which can be ordered instead of the wooden one. Price per handle 61.36 EURO, 120 BGN. Дръжка от фибростъкло с дължина 81 см за чукове с Weight над 1.8 kg, which can be ordered instead of the wooden one. Price per handle 92.03 EURO, 180 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Rock breaking hammer с карбидно острие

Rock breaking hammer made of steel с карбидно острие. Designation HMH CT. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle 41 cm long, which can be ordered instead of the wooden one. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Hammer for roughing and shaping large blocks of flat stone

Използването на този чук е операция от 2-ма души: един човек държи чука на ръба му под лек ъгъл от външния ръб на камъка and точно зад сегмента от камък, който трябва да бъде отстранен; след това вторият човек удря гърба на чука с ударен чук със сравнимо Weight. Острието на чука за грубо обработване and оформяне има два работни ръба. Когато едната страна започне да се износва, коригирайте позицията, за да използвате другата страна на острието, или обърнете позицията на главата върху дръжката.
Да не се удря с чука върху камъка със замах and да не се удря с друг чук по остриетата.

Hammer for roughing and shaping large blocks of flat stone. Weight 3.6, 4.5 and 5.5 kilograms, with a wooden handle 76 cm or a fiberglass handle 81 cm. Designation HBS. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle with a length of 81 cm for hammers with a weight over 1.8 kg, which can be ordered instead of the wooden one. Price per handle 92.03 EURO, 180 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Steel hammers for trimming the contours of a stone

Modeled after traditional designs, these trimmer hammers are well balanced and come in a variety of weights and configurations. Their fully hardened steel blades and cutting surfaces are durable and easy to maintain.
Available as a hammer with concave peeling and splitting blades, concave peeling blades on both sides, with flat square peeling faces on both sides, with a 41 or 76 cm wooden handle, a 41 or 81 cm fiberglass handle.

Steel pruning hammer with concave peeling blades and splitting blade

Steel pruning hammer with concave peeling blades and splitting blade, Weight 900 and 1600 grams, with wooden or fiberglass handle 41 cm. Designation HTH B. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle, 41 cm long. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Steel pruning hammer with concave peeling blades on both sides

Steel pruning hammer with concave peeling blades on both sides, Weight 1600 and 2000 grams, with wooden or fiberglass handle 41 cm. Designation HTH. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle, 41 cm long. Price per handle 61.36 EURO, 120 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Steel pruning hammer with flat square faces for peeling on both sides

Steel pruning hammer with flat square faces for peeling on both sides, Weight 1800 and 2700 grams, with wooden handle 41 or 76 cm, with fiberglass handle 41 or 81 cm. Designation HTH. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Fiberglass handle 41 cm long for hammers with Weight 1800 g, which can be ordered instead of the wooden one. Price per handle 61.36 EURO, 120 BGN. Fiberglass handle with a length of 81 cm for hammers with a weight of 2700 g, which can be ordered instead of the wooden one. Price per handle 92.03 EURO, 180 BGN. I am sending by courier. I need to confirm the request. Order Send inquiry

Spare hammer handles

All wooden handles are sourced from American suppliers and manufacturers of the highest grade hickory available. Replacement wooden handles will be supplied with wood and steel shims for proper installation of the handle. Wooden handles may require sanding to properly fit into the hammer lug.
Fiberglass handle kits are supplied by Nupla, a leading American manufacturer of fiberglass handles. All kits include handle, epoxy and assembly instructions.

Spare hammer handles, length from 17 to 81 cm depending on the type of hammer. Possibility to order, ask for Price. I am sending by courier. I need to confirm the request. Order Send inquiry