Adapters for masonry tools, attachments and accessories

Consultation Send inquiry

Shipping by courier.

Possibility to order.

Adapters for pneumatic and hand tools

Pneumatic tool shank adapter

The shank adapter provides a convenient way to use Trow & Holden's delicate 8mm shank Bantam chisels in air hammers that are designed for 12.7mm shank chisels. However, Bantam chisels should not be used in an air hammer with a piston size larger than 3/4 inch - 19mm. Designation S-ADAPT. Price 60 BGN, 31.64 EURO per piece. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Pneumatic tool shank adapter - real photo of the tools. Designation S-ADAPT. Price 60 BGN, 31.64 EURO per piece. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Impact cap adapter for pneumatic tool shank

The 35mm diameter impact cap is made from wear-resistant steel and provides a durable, removable impact surface that slides securely onto any of our 1/2" shank air chisels - 12.7mm. It is ideal for protecting the shank of air chisels when light tapping with a hand hammer may be required. Not intended for use with bushings or roughing chisels. Designation S-CAP. Price 50 BGN, 27.69 EURO per piece. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Impact cap adapter for pneumatic tool shank - real photo of the tools. Designation S-CAP. Price 50 BGN, 27.69 EURO per piece. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Adapter rubber retainer for pneumatic chisel shank

The rubber retainer secures the chisel to the pneumatic hammer while allowing the tool to be guided freely. Easy insertion and removal of the chisel or retainer. Designation CR. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry When you purchase a pneumatic hammer or pen, you receive a free rubber stopper.

Adapter rubber retainer for pneumatic chisel shank - real photo of the tools. Designation CR. Prices are in the table above. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry When you purchase a pneumatic hammer or pen, you receive a free rubber stopper.

Adapter rotating rubber retainer for pneumatic chisel shank

The rotating retainer is designed specifically for use with bush hammers, but will work with any round shank tool. It easily and securely attaches to the air tool with a flexible loop, keeping the chisel free to rotate on the stone. The rotating retainers require no modifications to your air tools or chisels and are available to fit all of our air tools in a variety of sizes. Designation SR. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Adapter rotating rubber retainer for pneumatic chisel shank - real photo of the tools. Designation SR. Prices are in the table above. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Carpenter's chisel to pneumatic hammer adapter

Converts hand carpentry chisels into pneumatic tools. 12.7 mm shank. Designation S-WOOD. Price 110 BGN, 56.24 EURO per piece. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Sketch of attaching a carpenter's chisel to a pneumatic hammer adapter. The built-in 6 mm wooden dowel is easy to replace after prolonged use.

Double action quick connect

Catalog photo of the double-action quick coupling Staubli Quick Connect. For easy hammer replacement or easy air shutoff. The first press stops the air flow while leaving the components firmly connected, the second press completely disengages the coupling. Male designation Staubli Quick Connect SS330. Price 40 BGN, 20.45 EURO for one item. Female designation Staubli Quick Connect SS331. Price 120 BGN, 61.36 EURO for one item. Kit designation Staubli Quick Connect SS333. Price 160 BGN, 81.81 EURO for one set. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Staubli Quick Connect - real photo of the tools. Order Send inquiry

Pneumatic hammer handles

Single handle pneumatic hammer. Comfort and control are the big advantages of installing a pistol grip on your air tool. The rubber loops fit snugly around the back of the air hammer to provide a contoured hardwood handle that helps isolate vibration without sacrificing control while working with your Trow & Holden air tools. Designation PG. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

For even greater vibration reduction, consider adding dual handles to your Trow & Holden air tool. For customers using dual handles, it is also recommended to use a chisel holder or rotary clamp to keep the chisels secured in the nose of your air hammer. Designation DG. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Chisel handles

Reduce vibration and improve control of your air chisels with the wooden handle with rubber loops. The rubber loops are easy to install, yet secure enough for rough work. Available in three sizes to fit all your Trow & Holden air chisels. Designation CW. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Hand tool holder

A safe way to hold and operate a chisel. Keep your hand safe by minimizing shock and vibration with this simple yet effective device. The rubber grips on the holder grip the tool handle firmly, yet still allow you to adjust the angle of the blade. Available in sizes to fit all hand tools. Fits handles with diameters of 13, 16, 19, 22, 25, 29 mm. Designation CW. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Hand guards

The polyurethane shield protects against accidental impacts. Simply slide the two discs onto your Trow & Holden hand tool. The smaller disc goes on first to keep the hand guard from sliding down and preventing pinching. The adjustable strap attaches to your wrist so your hand tool won't hit the ground if accidentally dropped. Fits 25 and 29 mm diameter handles. Designation HS. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Trow and Holden Tool Attachments

Diamond discs - sharpening sandpaper and pads - angle grinder and drill holders

Keep your carbide-tipped tools working at their best and extend their service life with regular maintenance. Resharpening should be done as needed and before the carbide cutting edge becomes too rounded from excessive wear. To resharpen carbide using a bench grinder, simply select a silicon carbide wheel (green) of the appropriate size and attach it to your machine. Alternatively, 100mm diamond discs can be used with any drill or angle grinder with a speed reduction, making it easy to adjust tools if necessary on the job site. For more detailed instructions on sharpening and maintaining your tool, please read the Tool Care and Use Guide. Diamond Disc Grits 50, 100, 200. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Ergonomic work gloves

These half-finger gloves feature segmented palm padding that reduces the effects of vibration and impact without compromising dexterity or control. The grippy palm provides a secure hold on tools, while the built-in wrist support offers relief from discomfort during repetitive motions. Sizes M, L, XL. Designation ERG910. Prices are in the table below. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Ergonomic work gloves - real photo. Designation ERG910. Prices are in the table above. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Canvas tool wrap

Sturdy handmade Canvas tool wrap with nine pockets of varying widths - real photo. Dimensions unfolded 63/35 cm, folded and rolled up 13/20 cm. Designation TOOLWRAP/C. Price 110 BGN, 56.24 EURO for one item. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Canvas tool wrap with tools for writing letters and creating reliefs - standard set SET-LETTERING.

Leather tool wrap

Sturdy handmade genuine leather tool case with seven pockets of varying widths and two leather straps. Dimensions unfolded 63/35 cm, folded and rolled 15/20 cm. Designation TOOLWRAP/L. Price 410 BGN, 209.63 EURO for one item. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Leather tool wrap folded - real photo

Leather case for stonemasonry tools - real photo. It is suitable as a gift for sculptors and stonemasons.

Leather case for stonemasonry tools with the lid unfolded - real photo. Designation TOOLWRAP/L. Price 410 BGN, 209.63 EURO for one item. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Canvas tool bag

Sturdy Canvas tool bag made of 100% cotton fabric, with canvas inner pockets, mesh outer pockets, sturdy canvas handles, reinforced bottom and sturdy zipper. Normally holds 15 kg of tools. Dimensions 30/20/20 cm. Designation TOOLBAG/C. Price 190 BGN, 97.15 EURO for one item. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Canvas tool bag - real photo. Accommodates standard tool kits SET-SGTOOLS, SET-CGTOOLS, but you can make a set of your choice.

Leather tool bags - large and small

Sturdy tool bag handmade from genuine leather, with brass hardware and reinforced handles. Dimensions 45/19/25 cm. Designation TOOLBAG/L-LRG. Price 550 BGN, 281.21 EURO for one item. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Small tool bag handmade from genuine leather, with brass hardware and reinforced handles. Dimensions 18/ / cm. Designation TOOLBAG/L-SM. Price 380 BGN, 194.29 EURO for one item. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Large leather tool bag - real photo.

Large leather tool bag, view of the internal compartments - real photo.

Large and small leather bags for stonemasonry tools - real photo.

Large and small leather bags for stonemasonry tools, another view - real photo.

Small leather bag for stonemasonry tools - real photo.

Small leather bag for stonemasonry tools, view of the internal compartments - real photo.

Accessories

Pair of glass drinking glasses Trow & Holden

Trow & Holden glass drinking glasses. Capacity 470 milliliters. Sold in pairs, two at a time. Designation GLASSES. Price 45 BGN, 23.01 EURO for a pair. Possibility of ordering. I will send by courier. I need to confirm the request. Order Send inquiry

Trow & Holden glass drinking glasses on a leather bag background - real photo.

Glass drinking glasses Trow & Holden - real photo.